Aurora Fire Pumps: A Few Good Fire Protection Tips

 

The risk of indoor fires increases substantially in tough conditions, such as rainy or winter seasons. Even holiday decorations are at a greater risk of fire than any other time of the year. Whether you are a homeowner, businessman, facility manager, or property dealer, it’s important to recognize the increased fire risk. You should know how to minimize it through careful planning and precautions. Below are a few fire protection tips.

1.      Avoid Overloaded Extension Cords

Abused or overloaded extension cords increase the risk of electrical fires. This isn’t just a fire risk, but also a risk of electric shock. So keep common areas and walkways clear. This will help you avoid any potential tripping on extension cords.

2.      Don’t Let the Sprinkler System Freeze

When there is a fire breaking out in a building, it’s important that your fire protection system operates as intended. Make sure there are no frozen pipes. Here, you need to schedule a fire sprinkler inspection to ensure the system is working properly.

3.      Prioritize Kitchen Safety

You should watch your cooking surfaces more closely. Keep kitchens, monitor stove tops, and ovens clean. Also, it’s vital to enforce space heater safety regulations and ensure the fire safety of your cooking area.

4.      Ensure Smoke Detector Coverage

Smoke detectors snuff out fires before they become worse. So it’s crucial to maintain or position extinguishers. Make sure you meet state and local codes for your building. Consider hiring a skilled fire protection team to ensure adequate smoke detector coverage.

5.      Be Strict About No-Smoking Guidelines

People are more likely to violate no-smoking rules. Since smoking is a huge risk factor for fires, make sure there is no smoking under the radar. Set designated areas for smoking away from the main building.

6.      Take Care of Fire Pumps

Fire pumps are crucial when you rely on a fire protection or sprinkler system. Imagine your building has inadequate water pressure - then what will happen during a serious fire accident? Your sprinkler head will react to smoke, but won’t be able to control the fire properly due to low water pressure. However, fire pumps can ensure that your fire sprinkler system distributes water throughout the entire building. So keep them free from any potential threat that may appear.

Installing and Maintaining Aurora Fire Pumps

Since 1919, Aurora Pump has been a leading name as a pump and system supplier. For more than 95 years, Aurora has been generating complete fluid flow solutions. The company is devoted to designing and manufacturing fire pumps and systems that efficiently adapt to an ever-evolving global market.

Keep in mind that the installation and maintenance part of Aurora Fire Pumps should be handled by professionals. This is because there is an array of considerations as per the National Fire Protection Association (NFPA). These considerations or rules should be updated from time to time. Though you need to perform weekly inspections, let professionals take care of monthly and annual inspections.

Aurora Pump is a global manufacturer of fire pumps for industrial, commercial, municipal, and fire protection applications. At Callaghan Pump, we supply Aurora Fire Pumps New York to meet your pumping needs. With over two decades of experience, we are committed to excellence. When it comes to customer happiness, we go beyond the product line.

The fire pumps we supply are typically listed by an approval institute. They are either powered by an electric motor or a diesel engine. They deliver the water via a pipe system to the fire sprinklers. The fire pump comes into action when the pressure is below a certain point in the fire sprinkler system. Applications of the Aurora Fire Pump New York include:

·         Commercial

Whether you are looking for a pump for recirculating water within an HVAC loop or boosting water pressure for fixtures, Aurora fire pumps deliver on satisfaction.

·         Fire Protection

As a registered company, Aurora is committed to providing high-quality pumping solutions.  This assures that Aurora fire pumps will stay at peak performance for years to come.

·         Industrial

Need fire pumps to process water supply, spray booths, or recirculation? Find the right pump among Aurora’s broad selection of fire pumps and pumping equipment. From reciprocating pumps to horizontal split-case, vertical split-case to vertical turbine pumps, ensure quality solutions for industrial uses.

·         Municipal/Water Treatment

Municipalities often need to secure ground, surface, or seawater. They need solutions to control flooding and even manage wastewater. Aurora offers high-pressure pumps for reverse osmosis applications and moves water to the people who need it.

Top Characteristics of Aurora Fire Pumps New York

Aurora fire pumps typically consist of non-corrosive (stainless steel, bronze) internal parts that avoid clogging, seizing, and corrosion. They are most often designed specifically for fire pump purposes. They are able to avoid cavitation and have a stable system pressure. This is because Aurora fire pumps have low NPSH curves that avoid cavitation. Some of the products offered by Aurora include:

·         Complete line of Aurora Fire Pumps, including horizontal or vertical mounted.

·         Electric motor-driven, diesel engine-driven, and steam-powered pumps.

·         Fire pump accessories like main relief valves, hose valve manifolds, and flow meters.

·         Jockey and pressure maintenance pumps.

If you are searching for Aurora Fire Pumps New York or need help with the fire pump selection, talk to experts at Callaghan Pump- an authorized master distributor of Aurora pumps for the New York metropolitan area. We specialize in high-pressure pumps and offer sales/services for the same.

Get in touch with us today.

VFD Water Booster Pump: Top 7 Benefits

 

You may have heard of water pressure booster pumps, but what about VFD water booster pumps? Do you know what makes them a great feature for commercial or high-rise buildings? Here’s everything you need to know about the VFD waterpump.

What is a Variable Frequency Drive (VFD)?

Most water pressure booster pumps need to be sized to maintain their design pressure. They experience maximum water flow at the lowest suction pressure. You can use a pressure control valve to control the system and maintain the desired pressure, but that’s not an ideal solution as it may cost you more time, money, and effort.

With a variable frequency drive, you can eliminate the need to have pressure control valves. This may save energy and eliminate maintenance costs. In fact, the addition of a VFD can save up to 20% of the overall amount. Also, VFD water booster pumps are great when it comes to slurry pumping applications and optimal pumping efficiency.

Why VFD Water Booster Pumps?

By adding a variable frequency drive to your booster pump, you can change it from one speed or single flow rate to variable speeds. And you know what? You don’t need a gearbox or electric motor. VFD pumps have other benefits too, besides regulating the flow rate.

These pumps can help you reduce power consumption, minimize the cost of operation, and save space. In the long run, the addition of a VFD can result in big savings and reduce the cost of ownership. You can fit it with other programmable control components to increase the flexibility of water booster pumps.

Top benefits of using VFD water booster pumps:

1.      Energy Reduction

VFDs are great when it comes to saving energy. When you use them in combination with intelligent pump management tools, they increase energy efficiency. However, VFDs are a double-edged sword because they may cost you the most energy when used in the wrong way. So make sure you fully understand the need to have a VFD.

2.      Extended Pump Life

Yes, VFDs can extend your NJ Water Booster Pump’s life. However, they can also damage pumps when you lack the tools to know where your pumps are operating on the tested curves. So make sure to read about the importance of pump testing and how VFDs fit into the equation.

3.      Easier Pump Selection

VFDs can simplify the pump selection process. Instead of opting for a pump for peak days and another one for low flow days, you can have a pump that serves both purposes. In other words, you can invest in VFD water booster pumps that have increased operation flexibility.

4.      Alleviate Pressure Transients

When your water booster pump starts or stops, its velocity changes. Thus, it creates pressure waves that echo until friction disintegrates them. The magnitude of these waves can be significant in bigger settings, which can result in water pressure loss. VFDs can adjust the speed of your pump and slow down the change of velocity in the pipe system.

5.      Control Full Load Amps

Sometimes, motors operate very close to the rated Full Load Amps (FLA). In other words, it runs at design capacity. By pulling additional power, you could overload or damage the motor. However, VFDs are the solution as they offer a configurable output current, which keeps the motor amps below the configured point.

6.      Regulate Inrush Currents

A fixed-speed motor results in a large electrical surge when it starts. The surge appears from the motor, and its magnitude might be several times the normal full load current. Therefore, high loads can damage your motor and electrical equipment. They can also make the sizing of current protection equipment overwhelming. To ramp up speeds slowly, you will need VFDs. They will help you reduce the start-up motor load and resultant inrush currents.

7.      Phase Loss Protection

Lastly, VFDs are able to keep your booster pumping even through a phase loss. Because the DC signal sent to the motor is removed, the drive can feed it power as long as the motor isn’t close to full power. You can also configure this feature for better management.

Concluding Remarks

NJ Variable Booster Pumps powered by VFDs are a great addition to your home if you are facing low water pressure problems. To get your brand new VFD water pump, feel free to contact us. Our team will get in touch with you quickly.

Callaghan Sump and Sewage Pumps

 Callaghan Pump and Controls, Inc. offers one of the finest Sump and Sewage Pumps. It offers 3 different types of Sump and Sewage Pumps to meet your range of requirements.

CT Variable Booster Pump: A Cost-Effective Water Pressure Device

 

Whether you are about to take a shower, cook dinner, or clean dishes, having low water pressure can be annoying. This is true for many Connecticut homeowners that have a busy routine. Luckily, there are always signs that you can spot if there’s a water pressure problem.

For instance, if your showerhead subsides to a trickle or the bathtub takes hours to fill, your house may have low water pressure. Here’s how to determine low water pressure problems.

1.      Check the Neighborhood

If your house is plagued with low water pressure, try to consult your neighbors. Are they complaining about a similar problem? Find out whether the water pressure issue affects the whole neighborhood. And if it does, consider installing a Connecticut Variable Booster Pump. It may help you increase the pressure of water from the main water line to your fixtures.

2.      Check the Pressure Regulator

In scenarios where your neighbors have adequate water pressure but you don’t, the culprit could be your water pressure regulator or reducing valve. If it is not in a working condition, call in a plumber. Also, confirm that the main shut-off valve is open.

3.      Check for Leaks

Another potential cause of low water pressure is leaks. A leak anywhere within the mainline can result in serious plumbing problems. Look out for water underneath your cabinet and countertops. Also, don’t forget to check around your appliances, such as washing machines, sinks, and showerheads, for any leaks.

4.      Check for Clogged/Corroded Pipes

Low water pressure is often symptomatic of bigger problems like clogged or corroded water pipes. A clogged pipe forces water to concentrate in one area. It reduces the rate of water pressure and often results in burst pipes. This is a common problem in older pipelines and homes. Also, if low water pressure is accompanied by a weird color or taste, the culprit could be corrosion. In that case, contact a professional plumber.

5.      Check the Plumbing

Still no closer to determining the cause of your low water pressure? You may need to take a closer look at your plumbing system. Are there any valves you aren’t aware of? Do you share your supply line branch with somebody else? Such issues could affect your water pressure and supply. You must address them, but how?

Consider Installing Variable Booster Pumps

If the low water pressure is not caused by leaks, clogs, or any aforementioned problems, then you may need a Connecticut Variable Booster Pump. It is a special type of pump designed to boost water pressure and improve water flow. If your city water is not able to provide enough water pressure, don’t worry. Variable water booster pumps are the answer to your problems.

Wrapping Up

Low water pressure is irritating and time-consuming, but not beyond repair. Whether it’s caused by the city supply, water source, or gravity, you can fix it with Connecticut Variable Booster Pumps. Here at Callaghan Pump, we’ve been serving the Connecticut area for more than 14 years. We are a master distributor of branded variable booster pumps. Need help?

Don’t hesitate to contact us.