NY Water Booster Pumps: 4 Less-Common System Failures

When it comes to problems related to water booster pumps in New York City, you may think of usual suspects such as motor burnout, basic wear and tear, corrosion, or impeller damage. But the truth has more layers in the dense population of NYC. 

Due to high-demand water systems, high-rise buildings, and weather, of course, many failures are less common and expensive to treat. This blog covers those unexpected NY water booster pump failures. 

Four Uncommon Damages in NY Water Booster Pump

You may know about the common failures, but below are some faults that you may not have heard of. Better to prevent than to have to experience the consequences. Therefore, we have also mentioned some hacks to avoid those outcomes.

1. Water Hammer Damage

When the water flow is abruptly stopped, a sudden pressure surge occurs in water pipes. It is known as water hammer. Due to quick-closing valves, damage can occur to water booster pumps in NYC. This type of less-known water booster damage happens when water is moving fast through a pipe and then suddenly comes to a stop. 

Why It Matters? 

This type of disturbance sends a shockwave through the water and the pipes. Hence, it can make noise, crack pipes, damage pump seals, and strain flanges, especially in older apartment buildings.

Warning Signs?

• Loud noises in the piping
• Loose or leaking joints
• Visible vibration after valve operation

How to Prevent?

Installing hammer arrestors or slow-closing valves is an ideal solution to prevent such damage. Also, plumbers should check that control systems ramp down pump speed gradually.

1. Pressure Sensor Drift

The role of the pressure sensor drift is to send the signal to the water booster pumps when to start and stop. However, over time, those sensors lose efficiency and can send wrong signals to the control system. 

Why It Matters?

When a sensor drifts, it leads to pump short cycling, essentially turning on and off too often (without any reason). Whether your NY water booster pump runs more or less than the needed duration, both scenarios increase wear, energy use, and the risk of failure.

Warning Signs?

• Fluctuating water pressure without a clear cause
• Pump running at odd intervals
• Inconsistent readings on the control panel

How to Prevent? 

Timely calibration of the pressure sensors can eliminate this issue to some extent. Alongside, higher-grade sensors with vibration isolation mounts improve longevity and eliminate such problems in NY water booster pumps. 

1. Air Entrapment in the System

This damage occurs when air pockets form inside water booster pump piping, especially after maintenance. Besides, air entrapment rises during the interruption of the water supply as well. Air can cause cavitation, causing tiny bubbles inside the pipes when pressure drops. Consequently, these bubbles collapse violently when pressure rises again.

Why It Matters?

Cavitation damages water pipes because tiny vapor bubbles form in the water when pressure drops too low, and then those bubbles collapse violently when pressure rises again. This shock at the metal surface causes pitting, erosion, and eventually leaks or failures.

Warning Signs?

• Rattling sound from the pump
• Unusual vibration levels
• Pressure spikes in the water booster system

How to Prevent?

To eliminate such damage, you can install air release valves at the highest points in the system. So, trapped air can easily escape, and there’s no possibility of cavitation, erosion, or pitting. 

1. Misconfigured VFDs

It’s an era of modern NY water booster pumps, and there’s no denying that modern devices have modern complications. From various types of booster pumps, one comes with VFDs (variable frequency drives). Such systems, when not programmed as they should be, result in inefficiency and overheating, causing significant damage. 

Why It Matters?

A poorly configured VFD can overwork the pump motor or fail to match system demand. And it wastes energy and reduces pump life. Thus, always purchase or fit water booster pumps from someone experienced. 

Warning Signs?

• Not adequate pump speed as per demand
• Overheating of the motor or VFD unit
• Increased electricity bills without increased usage

How to Prevent? 

It is better to have a certified VFD technician fine-tune your settings during installation and review them annually. 

Why These Failures Fly Under the Radar

The above-mentioned unconventional damages in NY water booster pumps remain unknown. This is because they don’t have quick consequences. Instead of causing an immediate system shutdown, the causes gradually show up. And then all of a sudden, tenants notice energy bill spikes, regular system failures, and a shorter lifespan for the booster pump. 

Nonetheless, by the time they are spotted, significant damage may already have occurred, setting the stage for expensive fixes. Hence, it is always suggested to perform regular maintenance and checkups of your NY water booster pump. Additionally, a reliable pump supplier in New York plays a significant part in ensuring you receive high-quality equipment.

Callaghan Pump is a trusted name for supplying modern, robust, and customized NY water booster pumps. We deliver to all locations in New York City. Reach out or share your requirements directly at 212-736-4146. 

A Guide to Choosing the Right NY Variable Booster Pump

 Sick of low water pressure in your New York house? Then NY Variable Booster Pumps are the perfect solution that can ably boost pressure for everything from bathroom showerheads to high-demand appliances. These pumps help deliver the water from a source throughout the facility at a uniform pressure.

A water booster pump consists of a centrifugal pump, inlet and outlet, impeller, and a pressure monitoring device. When water enters through the inlet, it is pushed out through the outlet with an impeller, which is spun by an electric or diesel motor. Also, there is a tank to build the right amount of water pressure.

Water Booster Pump Types

You can find two main types of booster pumps that are typically available as standard pumps and Variable Speed Drive (VSD) pumps. Ordinary or standard pumps work at a constant rate and don’t have the provision to boost flow rate or adjust speed. On the other hand, VSD pumps can help you adjust speed based on the different pressure head requirements. These pumps are great for cutting unnecessary energy costs.

Multi-Stage and Single-Stage Booster Pumps

Based on the number of impellers, water booster pumps can be classified into two main categories - single-stage and multi-stage. Single-stage booster pumps have a single impeller and are best for independent houses and residential buildings that have moderate pressure requirements. Typically, these booster pumps are enough for one building. The relative simplicity of design has made standard pumps the most commonly available and widely used pump type for commercial and residential applications.

On the other hand, multi-stage booster pumps are useful when the requirement of water pressure is high. Such applications include maintaining the city water pressure, carrying water over a very long pipe, or distributing water uphill. These pumps have two or more impellers fitted in series. They come with multiple liquid chambers or stages, with each consisting of an impeller, a combination of a diffuser, and return guide vanes.

Water booster pumps are also available in vertical and horizontal models. For congested spaces, vertical pumps are best as they require less area.

NY Water Booster Pump Applications

Water booster pumps find applications across a wide range of industry verticals that require the movement of water. For instance, high-rise buildings require higher pressure to deliver water to their upper floors and tanks. With an NY Water Booster Pump, you can tackle such issues. They are also often used to boost the water pressure or continuously circulate water in a building. Other applications include:

·         High water pressure cleaning

·         Irrigation Reverse Osmosis (RO)

·         Fuel delivery or oil and gas production

·         Mining or boiler feeder pumps in power plants

·         Pressurizing water for firefighting

At Callaghan Pump, we distribute high-quality, branded NY Water Booster Pumps designed to elevate water pressure in all applications from domestic to commercial. All our products are carefully hand-picked from world-renowned water pump manufacturers that are the very best when it comes to delivering unparalleled energy efficiency, pump performance, and control. Our wide-ranging product collection includes everything from single self-priming water pumps to multi-pump booster sets.

This is the most comprehensive platform for industrial, commercial, and residential pumps in the business. You won’t be dissatisfied with the results of pump engines when looking for application-specific pumping technologies, because the NY Variable Booster Pump meets most of your needs. As the largest pump distributor in New York, we can help you make the right choice. Just determine suitable pumps for your application and request them directly from our website.

In Conclusion

Since every building is unique, we supply the best booster kits to meet your exact requirements. Whether you need to increase the main water pressure or your private water supply, the brand-new NY Water Booster Pump is what you need. If you’re still unsure about what type of water booster pump would be most suitable for you, feel free to get in touch with any questions.

Need help finding the best NY Water Booster Pump?

NYC Variable Booster Pumps: Where Pumping Meets Innovation

Low water pressure is very common in older homes, high-rise structures, and improper plumbing lines. The problem could be frustrating as it directly affects your daily chores, such as cleaning, washing, bathing, etc. Keep in mind, low water pressure could be due to a variety of reasons. Sometimes it’s as simple as turning on your main valve, and other times it’s as complicated as replacing your entire plumbing system. Thus, it’s important to diagnose the root cause so you can fix the problem accordingly. 

Do You Have Low Water Pressure Issues? Here’s a Solution…

Ever heard of NYC Variable Booster Pumps? These pumps are specifically designed to battle low water pressure problems in high-rise buildings, industrial facilities, warehouses, office blocks, and other structures. They are the most viable solution if your building is dealing with a serious water pressure problem. For instance, it would be beneficial if your home is located at the end of the community water supply line or above the water supply line.

What makes NY Water Booster Pumps special is that they allow you to connect water pressure tanks in the series. Plus, they can be installed on any private, community, or municipal water supply systems, such as wells and cisterns. Remember, your situation could be unique. Therefore, troubleshoot your low water pressure problem to have the right solution in place.

New York’s Most Trusted Supplier of Water Booster Pumps

For more than 14 years, Callaghan Pump has been a leading distributor of NY Variable Booster Pumps, supplying state-of-the-art pumping solutions in New York. We perform different tests to ensure the efficiency, effectiveness, and quality of our products. On top of that, we keep everything budget-friendly, so you don’t have to break your bank to meet your pumping needs. That’s why we are renowned as the most trusted pump supplier in New York.

Learn more about the NY Water Booster Pump.