Imagine
this: You are leaving your home for a long vacation, and your water booster pump system will not be in use. What will you do to prepare it for when you
are on vacation? What are the important measures you should take? Is there
anything you should do before leaving? Let’s find out!
1.
Turn Off the Main Water Supply
Nothing
ruins a good vacation like coming home and finding out that your water booster
pump is leaking. To avoid this, you need to take care of the main water supply.
Turn it off if you’re going to be on a vacation for a week or more.
2.
Check the Sump Pump
It is
reported that rainwater can also be a nightmare for water booster pumps. Your
sump pump can fail if a major storm comes around while you are away. So make
sure the sump pump is nicely working before you leave the place. If possible,
perform a full check of the system prior to your departure.
3.
Test Your Current Water Pressure
Use a water
pressure gauge, which can be purchased from a hardware store, to test the
existing water pressure. It will tell you how many pounds per square inch (PSI)
water pressure you have. Make sure it does not go over 75 PSI because it can
damage the plumbing system.
In Addition…
Water pumps
are the cogs in the wheel, keeping your facility functioning efficiently.
Whether they are used for manufacturing processes or house-holding, it is vital
to keep your pump running properly. Here, a regular maintenance schedule should
be followed.
·
Determine Maintenance Frequency
Consult the
original manufacturer and their guidelines. Consider the timing to schedule
your pump tests and maintenance. Get to know your system and make note of
leaks, unusual sounds, vibrations, etc.
·
Keep Safety First
Make sure
all the components of the water booster pump machines are properly shut down
before performing your maintenance. Proper isolation is crucial for electrical
systems and also for hydraulic systems.
·
Mechanical Inspection
Check that
mounting points of the pump are secure. Make sure to inspect the packing and mechanical
seal. Also, inspect the couplings and clean filters. Don’t forget to lubricate
the motor and pump bearing as per the guidelines of the manufacturer.
·
Electrical Inspection
Check that
all the terminations are tight. Inspect motor vents, so there won’t be any dust
or dirt build-up. Again, clean according to the guidelines of the manufacturer.
·
Replace Damaged Seals
If there are
any hoses, seals, or O-rings that show wear or damage, replace them immediately.
Use a temporary rubber assembly lubricant to ensure a tight fit. This will also
prevent leaks or slips.
So this is
it – everything you need to know about water booster pump inspection before you
leave. Consider every little thing while inspecting your Water Booster Pump
System. We hope things are clear enough now.
If you are interested in investing in a New York City Water Booster Pump, feel free to get in touch with us. We will help you find the best NYC Water Booster Pump for your building.
