If you are reading this, you are most likely encountering low water pressure in your building. Your showerheads may have poor pressure, where water dribbles out at a slower rate. Your washing machine might be taking forever to fill. These are some of the most common issues associated with low water pressure. There are a number of reasons, but fortunately, you can correct them with a minimal investment of time or money.
Before
moving ahead, make sure to check your water pressure to determine if it’s lower
than the normal value (30 PSI). Also, it’s best to diagnose the root cause to
solve the problem permanently. Check the water pressure all throughout the
building and ask for an expert’s opinion to understand the entire situation.
Below are a few tricks and tips to increase your home’s water pressure. Please
have a look.
- Address Issues Related to Water Supply
If it is only your water taps that have low pressure, you need to look for a few things. This could be due to the clogging of the main water pipeline. There could be many reasons behind the clogging, such as debris, algae, or mineral formation. In such a scenario, hire a plumber to fix the issue and prevent this from happening again by installing a water softener.
- Look for Household Leaks
Leaks are among the most common causes of low pressure. They are an end result of old plumbing fixtures that aren’t repaired from time to time. You should conduct a quick check for leaks and search for damp spots beneath pipelines. You can attempt to repair small leaks yourself. If you see any leaky pipes, get them fixed or just remove them before they create bigger problems.
- Check the Shut-Off Valve
Still haven't found anything? Check your shut-off valve and make sure it is completely open. Take a look at your master shutoff valve and turn it on if it's in a closed position. This isn’t a problem, but is very common among several homeowners. Also, inspect your pressure-reducing valve (if you have one).
- Replace Old Water Supply Pipelines
Old pipelines often clog due to mineral build-up or corrosion, which further hinder water pressure and flow. The solution is pretty simple: Replace these pipes with copper or galvanized steel pipes. Also, check the size of your pipes. A pipe with a small diameter can cause water pressure problems. As a simple rule of thumb, keep the diameter of your supply pipeline at least 19mm or 25mm if it serves three or more bathrooms.
- Address Poor Municipal Water Supply with NJ Water Booster Pumps
If the aforementioned tricks and tips weren’t enough to boost your water pressure, then you need something permanent. Invest in a New Jersey Water Booster Pump and address this issue. Make sure there are no corroded or clogged pipes since water booster pumps could damage or break them. This is a great solution if you live in a multi-story building where water has to travel against gravity.
Ending Lines
Increasing
your home’s water pressure isn’t rocket science, and it isn’t a daunting chore.
By understanding the root cause, you can overcome any issue. Note that NJ
Water Booster Pumps come in a wide variety of sizes and styles. Therefore,
it is advised to consult an experienced professional to determine which pump is
best suited for your water pressure needs.
For more information regarding NJ Variable Booster Pumps, please contact us.
No comments:
Post a Comment